7
Press [User Name].
8
Enter the user name, and press [Enter].
•
Up to 64 characters can be entered.
•
For details on entering characters, refer to Chapter 1, "Entering Characters" in the
Administrator's Guide.
9
Press [Password].
10
Enter the password, and press [Enter].
•
Up to 28 characters can be entered.
•
For details on entering characters, refer to Chapter 1, "Entering Characters" in the
Administrator's Guide.
11
Press [Enter].
12
Repeat steps 4 to 11 to specify all the destinations.
•
You can also specify e-mail addresses, shared folders, user boxes, and the shared box as
destinations.
•
To confirm a specified destination, press [Location]. For details on confirming destinations,
refer to
"Confirming Specified
Destinations".
(See page 5-18.)
Basic Scanning
1-15
1