Muratec MFX-2550 User Manual page 171

Item
Erase Tx
Doc
Note
• To change the type of a box, delete the F-code box you want to change, and register
it again. (See page 4-32.)
• Up to 20 F-code boxes can be registered.
Registering / Editing Secure F-Code Boxes
„
This section describes the procedure for registering secure F-code boxes. When editing,
select the box you want to edit in step 4, and press [Edit]. Enter the I.D. Code and press
[Enter], and then select the item you want to edit.
1
Press <Setting>.
2
Press [Register].
3
Press [F-Code Box].
4
Press [Add].
When editing, select the box you want to edit, and press [Edit].
4-24 F-Code Communications
Secure Bulletin
Box Box
Register if If this setting is enabled, stored documents are erased after
−
necessary transmission.
Description