4
Press [Browse], and search the network for the folder where the file you want to
attach is located.
If folder shortcuts are registered, select the shortcut for the folder where the file you want to
attach is located.
5
Specify the file to attach, and press [Enter].
Press
to display detailed information for the file. To close the detailed information screen,
press [Close].
6
To continue to attach files, press [Shortcut] and repeat steps 4 to 5 of the
operation.
If you do not want to attach another file, proceed to step 7.
7
Press [Close] twice.
8
Specify the destination, and press <Start>.
For details on the procedure, refer to
Note
The limits on the files that can be attached with a single transmission are as follows:
•
Maximum of 10 files
•
Maximum of 20 MB total for the scanned data
"Basic
Scanning".
(See page 1-2.)
Advanced Scan Features
1
2
2-29