6
If you selected [e-mail], specify the destination for transmission report, and
press [Enter].
•
Up to 50 characters can be entered.
•
To delete one of the entered characters, press [Clear].
7
Press [Close] twice.
8
Specify the destination, and press <Start>.
For details on specifying the destination, refer to
Note
You can change the transmission report settings while scanning. Press [Tx Report] on
the screen displayed while scanning. Continue the procedure from step 5.
"Specifying
Checking the Transmission Result (Transmission Report)
Destinations".
(See page 5-2.)
1
2
3
4
5
6
6-3