6
Specify the destination, and press <Start>.
•
If you do not set the next document settings, this completes the procedure.
•
For details on specifying the destination, refer to "
7
Load the next document to scan.
Set the resolution and contrast as necessary.
8
Press [Next Doc] or <Start>.
When the loaded documents have been scanned, the message "Set next document" is
displayed.
9
If you want to scan another document, repeat steps 7 to 8.
10
When you have finished scanning all the documents, press [Tx Start].
Specifying
Destinations".
(See page 5-2.)
Scan Related Settings
1
2
3
4
4-7