Muratec MFX-2550 User Manual page 110

2
Press [Resolution].
If [Resolution] is not displayed, press [Advanced] and then select [Resolution].
3
Select the desired resolution, and press [Enter].
4
Specify the destination, and press <Start>.
• For details on specifying the destination, refer to "
page 5-2.)
• If you loaded the document in the ADF, this concludes the procedure.
• If you loaded the document on the document glass, load the next document, and press
[Next Doc]. Press [Tx Start] to start transmission.
Note
• The Super Fine mode may not be supported by the destination machine. In this
case, the optimal resolution will be automatically selected.
• The communication time differs according to the selected resolution.
Selecting from the Address
Basic Faxing
1
2
3
Book". (See
3-25