Muratec MFX-2550 User Manual page 111

„ Setting the Contrast
Set the contrast to scan with according to the document.
• Lightest: Select to scan with the lightest contrast.
• Lighter: Select to scan with a contrast lighter than the standard contrast.
• Normal: Select to scan with the normal contrast.
• Darker: Select to scan with a contrast darker than the standard contrast.
• Darkest: Select to scan with the darkest contrast.
1
Load the document, and press <Fax>.
2
Press [Contrast].
If [Contrast] is not displayed, press [Advanced] and then select [Contrast].
3
Select the desired contrast, and press [Enter].
Lightest
4
Specify the destination, and press <Start>.
• For details on specifying the destination, refer to "
page 5-2.)
• If you loaded the document in the ADF, this concludes the procedure.
• If you loaded the document on the document glass, load the next document, and press
[Next Doc]. Press [Tx Start] to start transmission.
3-26 Basic Faxing
Normal
Darker
Lighter
Darkest
Selecting from the Address Book". (See