Muratec MFX-2550 User Manual page 12

5
Press <Start>.
• If you selected a destination from the address book, this step is not required.
• If you loaded the document in the ADF, this concludes the procedure.
6
If you loaded the document on the document glass, load the next document, and
press [Next Doc].
To finish scanning, press [Complete].
7
Repeat step 6 to scan all the documents.
To finish scanning, press [Complete].
Note
You can register often-used destinations in the [Faves] tab. (See page 7-36.)
Basic Scanning
1
1-3