6
Enter the sub-address registered in the other machine using the numeric keys,
and press [Enter].
•
Up to 20 digits can be entered for a sub-address.
•
To delete one of the entered characters, press [Clear].
•
To delete all of the entered characters, press [All Clear].
7
If a password is set, press the password entry box.
If a password is not set, proceed to step 9.
8
Enter the password using the numeric keys, and press [Enter].
Up to 20 digits can be entered for a password. Numerals, # and * can be entered.
9
Press [Enter].
Press [F-Code Tx] again to return to the screen in step 4, where you can correct the sub-
address and/or password if entered incorrectly.
10
Press [Close].
11
Specify the destination, and press <Start>.
For details on specifying the destination, refer to
page 5-2.)
"Specifying
Destinations".
F-Code Communications
1
2
3
4
(See
4-35