Muratec MFX-2550 User Manual page 310

7
Press [Close].
To continue to change other default values, repeat steps 4 to 7 of the operation.
„ List of Default E-mail Settings
Function
FileFormat This sets the default file
format used when a scanned
document is saved. In the
default settings for PDF
w/ Password, you can
set the encryption level
and restrictions with a
permissions password.
Note
If you have changed the file
format in the default scanner
settings, that setting is also
changed.
Batch Scan Set the default batch scan
setting.
Note
• Underlined values are the default settings specified at the time of shipment.
• For details on these settings, refer to "Setting Example".
„ List of Default Internet Fax Settings
Function
FileFormat This sets the default file format used when a transmitting data
via Internet Fax.
TIFF-S: The simple mode TIFF format. Documents are all
TIFF:
PDF:
Batch Tx Set the default batch transmission setting.
Note
• Underlined values are the default settings specified at the time of shipment.
• For details on these settings, refer to "Setting Example".
Description
Mono
TIFF
PDF
PDF w/ Password
Color
JPEG
PDF
PDF w/ Password
PDF w/ Password
Encryption Level: Low (40-bit RC4),
(See page 7-42.)
Printing:
Editing:
Copying:
ON
OFF
Description
converted to A4 size, 200 dpi for transmission.
The full mode TIFF format. Documents are
transmitted with the document size and resolution
set when scanning.
Documents are transmitted in the PDF format.
Settings
High (128-bit RC4),
High (128-bit AES)
Allowed, Not allowed
Allowed, Not allowed
Allowed, Not allowed
(See page 7-43.)
Settings
TIFF-S
TIFF
PDF
ON
OFF
(See page 7-43.)
Specifying Default Settings
1
Reference
page 2
2-30
3
4
5
6
7
2-27
Reference
page
4-77
4-76
7-45