3
Press [Scan Path].
4
Select [ON], and press [Enter].
If you select [OFF], the scan path notification setting is disabled.
5
Press [Close].
6
Specify the destination, and press <Start>.
For details on the procedure, refer to
Note
•
The notification e-mail is sent to the e-mail address registered in the user
information. This function can only be used if an e-mail address is registered in the
user information.
•
For details on registering user information, refer to Chapter 3, "Registering Users"
in the OfficeBridge Guide.
2-34
Advanced Scan Features
"Basic
Scanning".
(See page 1-2.)