Muratec MFX-2550 User Manual page 113

4
Enter the desired dialing option.
Dialing options can also be inserted from the fax number entry screen.
5
Specify the destination, and press <Start>.
• For details on specifying the destination, refer to "
page 5-2.)
• If you loaded the document in the ADF, this concludes the procedure.
• If you loaded the document on the document glass, load the next document, and press
[Next Doc]. Press [Tx Start] to start transmission.
„ Setting the Transmission Method (Memory Transmission / Real
Time Transmission)
There are two types of automatic transmission; memory transmission, which starts
transmission after the document is scanned, and real time transmission, which performs
transmission while the document is being scanned.
This explanation indicates the procedure for selecting either transmission method for a
single fax transmission.
• Real time transmission directly transmits the document to the other fax machine
without scanning the document into memory. Transmission starts after the
transmission operation, which allows you to easily confirm that the fax is sent to the
other machine.
• Memory transmission transmits the document after scanning the document into
memory. This allows you to take the document and leave without waiting for the
transmission to end, enabling you to save time.
1
Load the document, and press <Fax>.
• For details on loading documents, refer to Chapter 1, "Loading Documents" in the User's
Guide.
• Set the resolution and contrast as necessary.
3-28 Basic Faxing
Selecting from the Address
(See page 3-24.)
Book". (See