2
Press [Contrast].
If [Contrast] is not displayed, press [Advanced] and then select [Contrast].
3
Select the desired contrast, and press [Enter].
Lightest
4
Specify the destination, and press <Start>.
•
For details on the procedure, refer to "
•
If you loaded the document in the ADF, this concludes the procedure.
•
If you loaded the document on the document glass, load the next document, and press
[Next Doc]. To finish scanning, press [Complete].
1-22
Basic Scan Settings
Normal
Darker
Lighter
Darkest
Basic
Scanning".
(See page 1-2.)