Transmitting A Cover Page With Documents (Cover Page) - Muratec MFX-2550 User Manual

5
Select the sender name, and press [Enter].
6
Press [Close].
7
Specify the destination, and press <Start>.
For details on specifying the destination, refer to

Transmitting a Cover Page with Documents (Cover page)

A cover page containing a simple message can be automatically attached to the
documents. You can either enter a subject and message or use a template registered in
advance to insert the cover page document. For details on registering templates, refer to
"Registering / Editing
Data regarding the destination and the sender is automatically entered on the cover
page, but the information that is entered differs according to the method for specifying
the destination and the login status.
Destination If you specify the destination using the numeric keys, only the fax number is entered
field: in the destination field. If you specify an address book destination, the information
registered in the address book, such as the company name, department, name, fax
number, and e-mail address, is entered in the destination field.
TTI field: If you have performed a user login, the information registered for the user, such as
the user name and telephone number, is entered in the TTI field. If you have not
performed a user login, the TTI name and TTI number registered in the intial setup
are entered in the TTI field. For details on performing a user login, refer to Chapter
1, "Logging In / Logging Out" in the Administrator's Guide. For details on the basic
settings, refer to
Templates". (See page 7-51.)
"Initial Setup (User
"Specifying Destinations".
Install)". (See page 3-2.)
Various Fax Functions
(See page 5-2.)
4-9
1
2
3
4