Daikin SUPER MULTI NX CTXS07JVJU Service Manual page 91

Super multi nx g-series / j-series
Hide thumbs Also See for SUPER MULTI NX CTXS07JVJU:
Table of Contents

Advertisement

CTXS-J, CTXS-H, FTXS-H Series
 What ' s the HOME LEAVE operation?
Is there a set temperature and airflow rate which is most comfortable, a set temperature and airflow rate which you use the most?
HOME LEAVE operation is a function that allows you to record your favorite set temperature and airflow rate. You can start your
favorite operation mode simply by pressing
 Useful in these cases
1. Use as an energy-saving mode.
Set the temperature 3-5˚F(2-3˚C) higher (COOL) or lower (HEAT) than normal. Setting the fan speed to the lowest
setting allows the unit to be used in energy-saving mode. Also convenient for use while you are out or sleeping.
• Every day before you leave the house...
When you go out, press
air conditioner will adjust capacity to
reach the preset temperature for HOME
LEAVE operation.
• Before bed...
Set the unit to HOME LEAVE operation
before leaving the living room when
going to bed.
2. Use as a favorite mode.
Once you record the temperature and airflow rate settings you most often use, you can retrieve them by pressing
You do not have to make all the selections again.
NOTE
• Once the temperature and airflow rate for HOME LEAVE operation are set, those settings will be used whenever HOME LEAVE operation is used in
the future. To change these settings, please refer to the before using HOME LEAVE operation section above.
• HOME LEAVE operation is only available in COOL and HEAT operation. It cannot be used in AUTO, DRY, and FAN operation.
• HOME LEAVE operation runs in accordance with the previous operation mode (COOL or HEAT) before using HOME LEAVE operation.
• HOME LEAVE operation and POWERFUL operation cannot be used at the same time. Last button that was pressed has priority.
• The operation mode cannot be changed while HOME LEAVE operation is being used.
• When operation is shut off during HOME LEAVE operation, using the remote controller or the indoor unit ON/OFF switch, "
remote controller display.
83
on the remote controller. This function is convenient in the following situations.
When you return, you will be welcomed
and the
by a comfortably air conditioned room.
The unit will maintain the temperature in
the room at a comfortable level while you
sleep.
SiUS12-928_B
Press
again, and the air
conditioner will adjust capacity to the set
temperature for normal operation.
When you enter the living room in the
morning, the temperature will be just right.
Disengaging HOME LEAVE operation will
return the temperature to that set for
normal operation. Even the coldest
winters will pose no problem!
.
" will remain on the
Operation Manual
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents