Auto · Dry · Cool · Heat · Fan Operation - Daikin SUPER MULTI NX CTXS07JVJU Service Manual

Super multi nx g-series / j-series
Hide thumbs Also See for SUPER MULTI NX CTXS07JVJU:
Table of Contents

Advertisement

SiUS12-928_B
3.2
AUTO · DRY · COOL · HEAT · FAN Operation
AUTO · DRY · COOL · HEAT ·
FAN Operation
NOTE
MODE
• Since this air conditioner heats the room by taking heat from outdoor air to indoors, the heating capacity becomes smaller in lower outdoor
temperatures. If the heating effect is insufficient, it is recommended to use another heating appliance in combination with the air conditioner.
• The heat pump system heats the room by circulating hot air around all parts of the room. After the start of HEAT operation, it takes
HEAT
some time before the room gets warmer.
• In HEAT operation, frost may occur on the outdoor unit and lower the heating capacity. In that case, the system switches into
defrosting operation to take away the frost.
• During defrosting operation, hot air does not flow out of indoor unit.
• This air conditioner cools the room by releasing the heat in the room outside. Therefore, the cooling performance of the air
COOL
conditioner may be degraded if the outdoor temperature is high.
• The computer chip works to rid the room of humidity while maintaining the temperature as much as possible. It automatically
DRY
controls temperature and airflow rate, so manual adjustment of these functions is unavailable.
• In AUTO operation, the system selects an appropriate operation mode (COOL or HEAT) based on the room and outside
AUTO
temperatures and starts the operation.
• The system automatically reselects setting at a regular interval to bring the room temperature to user-setting level.
FAN
• This mode is valid for fan only.
11
Operation Manual
The air conditioner operates with the operation mode of your choice.
From the next time on, the air conditioner will operate with the same operation mode.
 To start operation
1.
Press
• Each pressing of the button advances the mode setting in sequence.
AUTO
DRY
2.
Press
.
• "
" is displayed on the LCD.
• The OPERATION lamp lights green.
Display
 To stop operation
Press
again.
• "
" is no longer displayed on the LCD.
• The OPERATION lamp goes off.
Notes on each operation mode
and select an operation mode.
COOL
HEAT
CTXS-L, FTXS-L Series
FAN
90

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents