Econo Operation - Daikin SUPER MULTI NX CTXS07JVJU Service Manual

CTXS-L, FTXS-L Series
3.7

ECONO Operation

ECONO Operation

NOTE
 Notes on ECONO operation
• ECONO operation can only be set when the unit is running. Pressing
on the LCD.
• ECONO operation functions in AUTO, COOL, DRY, and HEAT operation.
• POWERFUL and ECONO operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
• If the level of power consumption is already low, ECONO operation will not drop the power consumption.
19
99
ECONO operation is a function which enables efficient operation by limiting the
maximum power consumption value.
This function is useful for cases in which attention should be paid to ensure a
circuit breaker will not trip when the product runs alongside other appliances.
 To start ECONO operation
Press
• " " is displayed on the LCD.
 To cancel ECONO operation
Press
• " " is no longer displayed on the LCD.
[Example]
Normal operation
• In case the air conditioner and other
appliances which require high power
consumption are used at same time, a circuit
breaker may trip if the air conditioner operate
with its maximum capacity.
Running current and
power consumption
Maximum during
Normal
normal operation
operation
Maximum during
ECONO operation
ECONO
operation
From start up until set temperature is reached
during operation.
again.
ECONO operation
• The maximum power consumption of the air
conditioner is limited by using ECONO operation.
The circuit breaker is unlikely to trip even if the
air conditioner and other appliances are used at
same time.
• This diagram is a representation for illustrative
purposes only.
The maximum running current and power
consumption of the air conditioner in ECONO
operation vary with the connecting outdoor
unit.
Time
causes the settings to be canceled, and "
SiUS12-928_B
" is no longer displayed
Operation Manual