SiUS12-928_B
Step
Disconnect the connector
7
for the gas pipe
thermistors [S92] and pull
out the clamp.
8
Disconnect the connector
for the thermistors [S90]
and pull out the clamp.
9
The wire harness of the
thermistors is hooked
under the electrical box.
Unhook it and pull out the
clamp.
Removal Procedure
Procedure
[S92]
[S90]
Clamp
Hook
Outdoor Unit: 3MXS24JVJU, 4MXS32GVJU
When reassembling, insert
the clamp into the hole.
Clamp
(R10537)
When reassembling, insert
the clamp into the hole.
Thermistor ASSY
(R10538)
When reassembling, insert
the clamp into the small hole.
Clamp
(R6420)
Points
[S92]
(R17356)
(R17142)
Fixing position for the
thermistor harness
236