Rotation Pulse Check On The Outdoor Unit Pcb - Daikin SUPER MULTI NX CTXS07JVJU Service Manual

Check
 Diagnose method (Diagnose according to 6 LEDs lighting status.)
(1) If all the LEDs are lit uniformly, the compressor is defective.
(2) If the LEDs are not lit uniformly, check the power module.
(3) If NG in Check No.22, replace the power module.
(4) If any solder cracking is found, replace the PCB or repair the soldered section.
Caution
(1) When the output frequency is low, the LEDs blink slowly. As the output frequency increases, the
(2) On completion of the inverter checker diagnosis, be sure to re-crimp the FASTON terminals.
7.9

Rotation Pulse Check on the Outdoor Unit PCB

Check No.16
<Outdoor fan motor>
Make sure that the voltage of 320 ± 30 V is applied.
1. Set operation off and power off. Disconnect the connector S70.
2. Check that the voltage between the pins 4 - 7 is 320 VDC.
3. Check that the control voltage between the pins 3 - 4 is 15 VDC.
4. Check that the rotation command voltage between the pins 2 - 4 is 0 ~ 15 VDC.
5. Keep operation off and power off. Connect the connector S70.
6. Check whether 2 pulses (0 ~ 15 VDC) are output at the pins 1 - 4 when the fan motor is rotated
When the fuse is melted, check the outdoor fan motor for proper function.
197
 Replace the compressor.
 Refer to Check No.22.
18 class: Replace the power module (SPM).
24/32 class: Replace the main PCB. The power module (PM1) is united with the main PCB.
If there is no solder cracking, replace the PCB.
LEDs blink quicker. (The LEDs look like they are lit.)
Otherwise, the terminals may be burned due to loosening.
1 turn by hand.
If NG in step 2  Defective PCB
If NG in step 4  Defective Hall IC  Replace the outdoor fan motor.
If OK in both steps 2 and 4
PCB
S70
1
2
3
4
5
6
7
Direction of crimp
FASTON terminal
 Replace the PCB.
 Replace the PCB.
Actual rotating pulse output (0 ~ 15 VDC)
Rotation command pulse input (0 ~ 15 VDC)
15 VDC
320 VDC
SiUS12-928_B
This size is shortened
by the crimp.
(R15292)
(R10811)
Service Diagnosis