Home Leave Operation - Daikin SUPER MULTI NX CTXS07JVJU Service Manual

SiUS12-928_B
4.5

HOME LEAVE Operation

HOME LEAVE Operation

HOME LEAVE operation is a function which allows you to
record your preferred temperature and air flow rate settings.
To start HOME LEAVE operation
1. Press "HOME LEAVE button".
• " " is displayed on the LCD.
• The HOME LEAVE lamp lights up.
To cancel HOME LEAVE operation
2. Press "HOME LEAVE button" again.
• " " disappears from the LCD.
• The HOME LEAVE lamp goes off.
Before using HOME LEAVE operation.
To set the temperature and air flow rate for HOME LEAVE operation
When using HOME LEAVE operation for the first time, please set the temperature and air flow
rate for HOME LEAVE operation. Record your preferred temperature and air flow rate.
Cooling
Heating
1. Press "HOME LEAVE button". Make sure "
controller display.
2. Adjust the set temperature with "
3. Adjust the air flow rate with "FAN" setting button as you like.
Home leave operation will run with these settings the next time you use the unit. To change
the recorded information, repeat steps 1 – 3.
14
Operation Manual
Initial setting
Air flow rate
Temperature
" "
77°F
77°F " "
Selectable range
Temperature Air flow rate
5 step, "
64-90°F(18-32°C)
5 step, "
50-86°F(10-30°C)
" is displayed in the remote
" or " " as you like.
FDXS-D Series
1, 2
" and
" "
" and
" "
116