Removal Of Fan Motor - Daikin SUPER MULTI NX CTXS07JVJU Service Manual

SiUS12-928_B
1.4

Removal of Fan Motor

Procedure
Step
1 Remove the nut and
remove the outdoor fan.
2 Remove the 2 screws of
the fan motor fixing flame.
3 Open the 2 hooks and
release the fan motor lead
wire.
4 Remove the 4 screws and
remove the fan motor.
Removal Procedure
Warning Be sure to wait for 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Nut
Outdoor fan
Fan motor
fixing
frame
(Backside)
Outdoor Unit: 2MXS18GVJU
Preparation
Disconnect the connector for the
fan motor and release the fan
motor lead wire according to the
"Removal of Electrical Box".
 When reassembling, align the
mark of outdoor fan with
the D-cut section of motor
shaft.
 Nut size : M6
(R17349)
 When reassembling, fix the
fan motor lead wire to avoid
contact with the outdoor fan.
(R17350)
(R5567)
Points
10 mm
(0.39 inch)
(R17404)
(R5568)
212