Setup Using Iprint - Axis 5400+ User Manual

Setup using iPrint

Installing AXIS IPP
Gateway
Configuration Snap-
in for NetWare 6.0
AXIS 5400+ / AXIS 5600+ User's Manual
iPrint is Novell's next generation of printing software that lets users print to
and from all destinations.
A standard Web page displays available printers to the user.
By clicking a printer, the iPrint client is installed (if not installed previously), the
printer's driver is downloaded, and a printer is created in the user's Printer
folder, enabling the user to send documents to the printer from any application
on the desktop.
Before setting up iPrint printers, make sure that you meet all the iPrint Setup
requirements. See the Novell iPrint Administration Guide for instructions on
installing, configuring, and customizing iPrint.
AXIS Print servers can be installed as iPrint printers, either by using the Novell
LPR gateway (LPR on IP) or the AXIS Gateway Configuration Snap-in for iPrint.
Axis provides two free Snap-ins for iPrint:
AXIS LPR Gateway Configuration
•
• AXIS IPP Gateway Configuration
When you install Service Pack 6 (16 April 2003) for NetWare 5.1 or later and
Service Pack 3 (16 April 2003) for NetWare 6.0 or later, the AXIS LPR Gateway
Configuration will automatically be installed and configured on the NetWare
Servers and ready for use.
The AXIS IPP Gateway Configuration Snap-in for NetWare 6.0 can be
downloaded for free from www.axis.com. Follow the instructions below to
install the AXIS IPP Gateway Configuration Snap-in for NetWare 6.0, if you
want to add it in your iPrint environment.
1. Download the free axisIPP-snap-in.zip file from www.axis.com and unzip
it in a temporary directory.
2. Make sure the the NetWare Enterprise Web Server was previously installed
on the server. Otherwise, install it.
3. Novell iPrint uses the NDPS infrastructure, so make sure that all the NDPS
requirements have been met:
• Make sure that the BROKER.NLM is loaded. If it isn't, type LOAD
BROKER in the server console prompt and select the name of the
Broker.
• Make sure that the NDPS Manager object is created in the Novell
Directory Services (NDS) tree. Refer to your Novell documentation for
creating this object.
• Make sure that the NDPSM.NLM is loaded. If it isn't, type LOAD NDPSM
in the server console prompt and select the appropriate NDPS Manager.
Setting Up - NetWare
53