Chapter 9 Port-Location Mapping; About Port-Location Mapping; Configuring Port-Location Mapping; Figure 9-1 System Setting: Port-Location Mapping - ZyXEL Communications VSG-1200 User Manual

9.1 About Port-Location Mapping

With port-location mapping, you can map a port on the VSG or a VLAN-enabled switch to a room number in a
building (such as a hotel). This is done using IEEE802.1q VLAN tags. The port-location mapping feature is used
together with the PMS billing function so charges can be done automatically.

9.2 Configuring Port-Location Mapping

Make sure you select Built-in Authentication and Scenario A in the Authentication screen and
Click System Settings in the navigation panel and the Port-Location Mapping link to display the screen as
shown.
The following table describes the labels in this screen.
LABEL
Create Port-Location Mapping
Set the fields below to insert a new port-location mapping rule.
Location Identifier (ID)
Port Identifier (ID)
Description
Port-Location Mapping
configure the PMS Configuration screen.

Figure 9-1 System Setting: Port-Location Mapping

Table 9-1 System Setting: Port-Location Mapping

Enter an identity (up to 20 characters) for a mapping. This field must match the VLAN ID of a port.
Enter the an ID number (between 1 and 999999) of a port for this mapping. This is the location ID
number you set in the PMS.
Enter a description (up to 32 characters) for this mapping.
VSG-1200 Vantage Service Gateway
Port-Location Mapping
This chapter describes the port-location mapping feature.
DESCRIPTION
Chapter 9
9-1