Table of Contents
Advertisement
Try to connect to a website to see if you have correctly set up your Internet connection.
4.3 Setting Up a Secure Wireless Network
Thomas wants to set up a wireless network so that he can use his notebook to access the Internet. In this
wireless network, the EMG serves as an access point (AP), and the notebook is the wireless client. The
wireless client can access the Internet through the AP.
Thomas has to configure the wireless network settings on the EMG. Then he can set up a wireless network
using WPS
(Section 4.3.2 on page
4.3.1 Configuring the Wireless Network Settings
This example uses the following parameters to set up a 2.4G wireless network.
WiFi Network Name
WiFi
WiFi Security Type
WiFi Password
802.11 Mode
Click Network Setting > Wireless > WiFi and click the Edit button. Note that you may see one or two
1
network name(s) displayed on this screen depending on whether you have selected Keep 2.4G and 5G
WiFi network name the same.
Chapter 4 Tutorials
42) or manual configuration
Example
Enable
WPA2-PSK
DoNotStealMyWirelessNetwork
802.11b/g/n Mixed
EMG6726/8726-B10A User's Guide
40
(Section 4.3.3 on page
44).
Advertisement
Table of Contents
