Amg1302-T11C Access And Login - ZyXEL Communications AMG1302-T11C User Manual

Turn the AMG1302-T11C off and on.
4
If the problem continues, contact the vendor.
5

29.2 AMG1302-T11C Access and Login

I forgot the IP address for the AMG1302-T11C.
The default IP address is 192.168.1.1.
1
If you changed the IP address and have forgotten it, you might get the IP address of the AMG1302-
2
T11C by looking up the IP address of the default gateway for your computer. To do this in most
Windows computers, click Start > Run, enter cmd, and then enter ipconfig. The IP address of the
Default Gateway might be the IP address of the AMG1302-T11C (it depends on the network), so
enter this IP address in your Internet browser.
If this does not work, you have to reset the device to its factory defaults. See
3
16.
I forgot the password.
The default admin user name and password can be found on the cover of this User's Guide.
1
If this does not work, you have to reset the device to its factory defaults. See
2
16.
I cannot see or access the Login screen for the web configurator.
Make sure you are using the correct IP address.
1
• The default IP address is 192.168.1.1.
• If you changed the IP address
• If you changed the IP address and have forgotten it, see the troubleshooting suggestions for
forgot the IP address for the AMG1302-T11C.
Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick
2
Start Guide.
Make sure your Internet browser does not block pop-up windows and has JavaScripts and Java
3
enabled. See
Chapter 29 Troubleshooting
(Section 8.2 on page
Appendix D on page 259.
AMG1302-T11C User's Guide
120), use the new IP address.
221
Section 1.7 on page
Section 1.7 on page
I