Sew Your Program - Husqvarna Quilt Designer II User Manual

Decorative Sewing
Change a Stitch or Letter
Any stitch or letter can be changed in when
the cursor is positioned under the stitch or let ter.
Simply touch the correct stitch or letter, to replace the
one you would like to change.
Add a Stitch or Letter
To add a stitch or letter in , move the cursor to
the next stitch after you wish to add a stitch. Touch
. Touch the stitch you wish to add.
Touch to bring up the rest of the
pro gram again.
Adjust Stitches in Program
If you want to adjust a stitch in a programmed
sequence, position the cursor under the stitch and
touch . The last stitch in a programmed
se quence can be ad just ed even though the cursor is
positioned after the stitch. You can use any of the
functions in ; stitch length and width,
mir ror image and elongation (elongation can be
made if satin stitches only are programmed).
The changes will be remembered in the
permanent memory.

Sew your Program

To sew your program, touch "FUNC" to bring up the
mode. Your stitch pro gram will ap pear on the
Touch Screen. Presser foot B is rec om mend ed. A stop
is in di cat ed by a stop sign symbol.
If you have programmed a stitch sequence that is
too long to be seen on the Touch Screen, check it by
stepping forwards/backwards in the sequence using
the icons.
Sew your program on a stabilized piece of fabric.
Adjust Entire Stitch Program
In you can use to ad just stitch
width, stitch length and mirror im age the entire
program. If you have pro grammed satin stitches only,
you are able to do elongation too. The chang es will
not be saved in the per ma nent mem o ry.
66