Windows 95 Troubleshooting - Intel EtherExpress PRO/100 User Manual

Mobile adapter 16-bit pc card with integrated 100 mbps transceiver
Hide thumbs Also See for EtherExpress PRO/100:
Table of Contents

Advertisement

C H A P T E R 4
An error was detected during initialization. Usually another error
message will be displayed giving more detailed information about the
failure. For example, if the INTERRUPT keyword in the
PROTOCOL.INI has an invalid value of '0A', the additional error
message Please specify a decimal number for the INTERRUPT
keyword is displayed after the Performance Series Adapter error
message.
M16AODI only supports the BUS ID PC Card, not the selected BUS
ID. Either delete the BUS ID keyword from the NET.CFG file or
change its value to 3.
This message applies only to the ODI driver. Do not use the keyword
BUS ID in the ODI NET.CFG file. If you do use it, you must set the
value to 3.

Windows 95 Troubleshooting

This troubleshooting information is intended primarily for users who
already had Microsoft Windows installed on their system and are
upgrading to Windows 95. It may also be helpful to new users of
Windows 95 who were unable to successfully install the Intel driver
using the instructions provided in Chapter 2, Software Installation.
Using Real Mode Card and Socket Services: When using Intel PC
Card adapters, should I still use DOS real mode Socket Services
Drivers?
No, it is recommended that you don't load the real mode Card and
Socket Services drivers. It is also recommended that you boot the
machine without EMM386.exe in the CONFIG.SYS. In rare cases
where you still want to load EMM386.EXE, make sure you don't use
the highscan keyword with EMM386.EXE. Windows 95 does not
detect devices correctly if there is a highscan keyword in the EMM386
line of the CONFIG.SYS file.
Installing from SCSI CDROM or EXTERNAL CDROM: I am install-
ing Windows 95 from a SCSI CD-ROM attached to a SCSI PC Card
Adapter. How can I install Windows 95 if it is recommended that I
don't load real mode card and socket services drivers since most SCSI
requires me to load a real mode SCSI driver?
Put a copy of the directory for CAB files of Windows 95 from the CD-
ROM on to your local hard drive. This will take up approximately
92

Advertisement

Table of Contents
loading

This manual is also suitable for:

Etherexpress pro/100 mbla1600

Table of Contents