Intel EtherExpress PRO/100 User Manual page 95

2 Choose the drivers yourself if none are selected. This is
recommended only for experienced users.
3 Override choices made by Windows 95. This is not
recommended. Only experienced users should attempt this.
f This is the next to last dialog box for the wizard. It should
read as follows: "You have finished the PC card wizard. To
enable 32-bit support, click Finish, and then restart your
computer for the changes to take effect." Click on the Finish
button.
g A final box should appear entitled "System Settings Change".
It should read as follows: "You must shut down Windows
and TURN YOUR COMPUTER OFF to continue setting up
this PC Card device. Would you like to shut down your
computer now?" Click Yes. Make sure that the computer is
completely turned off before turning it back on.
8 Insert your Intel PC Card adapter. Windows 95 should now
detect the Intel card, and put up a dialog box. It should automati-
cally load the drivers from the Windows 95 directory. If it asks
you to supply a manufacturer's disk, insert the Intel Network
Drivers Disk. Press Enter. It will ask you to restart now. Choose
yes. (We recommend copying the Windows 95 RETAIL or
WIN95 directory to your hard disk so that you won't be depen-
dent on the CD-ROM every time you need to reinstall.)
Hardware Specific Issues: Are there Laptops or Notebooks that don't
work with Windows 95 and PC Card adapters?
Read the HARDWARE.TXT file in the Windows 95 directory. This
file is supplied by Microsoft and describes machine-specific problems.
NetWare Server is Not Found: Everything seems to load, I have
checked that I have installed the Microsoft Client for NetWare, but I
still can't see my NetWare server when I click on Network Neighbor-
hood.
Sometimes the Frametype autodetection fails. You can force the frame
type IPX uses by going to the My Computer, Control Panel, Network,
IPX/SPX compatible properties.
Troubleshooting
95