Intel EtherExpress PRO/100 User Manual page 41

Windows for Workgroups Network Setup will detect the NetWare
configuration and automatically select Novell NetWare as an
additional network. It will also prompt for Novell support files
(from Novell Client diskettes) if required during the installation.
(If necessary, use the Novell decompression utility to decompress
the required files.)
Windows for Workgroups Setup will also attempt to determine
what NetWare driver model you are using. If for some reason
Windows for Workgroups was unable to detect the driver model,
you should select IPXODI and LSL as the driver type.
Note (in steps 10a and 10b) that you can install NetWare as an
additional network under Windows for Workgroups, or by itself
but with Windows support.
9 In the Network Setup dialog box, choose Networks.
10a To install both Windows for Workgroups and NetWare,
choose Install Microsoft Windows Network and proceed to step
11.
10b To install for NetWare only with Windows support, choose
Install Windows Support for the Following Network Only, select
the NetWare configuration appropriate for your network, then
proceed to step 11.
11 Choose Other under Additional Network Support, then select the
NetWare configuration appropriate for your network.
12 In the Network Setup dialog box, choose Drivers.
13 In the Network Drivers dialog box, choose Add Adapter.
14 In the Add Network Adapter box, choose Unlisted or Updated
Network Adapter and click OK.
15 When prompted for an "unlisted, updated, or vendor-provided
network driver disk," insert the Intel Network Drivers Disk.
16 Select "Intel M16A ODI for NetWare" and click OK.
17 Close the Network Drivers dialog box and click OK in the
Network Setup box.
18 Complete the installation process, inserting the Intel Network
Drivers Disk if required.
Software Installation
41