Keyword Alphabetical Reference - Intel EtherExpress PRO/100 User Manual

C H A P T E R 3
Parameters for the M16ATEST.EXE utility must be specified on the
DOS command line with the command M16ATEST. The parameters
are as follows:
M16ATEST.EXE Keywords
KEYWORD
FULLDUPLEX
INTERRUPT=
IOADDRESS=
IOWAITSTATES=
LINESPEED=
LINKDISABLE
ABLED)
MEMORY=
MEMWAITSTATES=
MODE=
NOCHECK
NOEARLYRX
NOEARLYTX
NOLED
SILENT
DURING TEST AND RETURNS DOS ERROR CODES)
SOCKET=
WORDSIZE=

Keyword Alphabetical Reference

?
CABLETYPE
DRIVERNAME
EARLYTRANSMIT
FULLDUPLEX
INT
80
DEFAULT
(NO KEYWORD = FULL-DUPLEX DISABLED)
5
320
0
AUTO
(NO KEYWORD = LINK INTEGRITY EN-
D2000
0
MEM
(NO KEYWORD = ADAPTER RESOURCE VERI
FICATION ENABLED)
(NO KEYWORD = EARLYRX ENABLED)
(NO KEYWORD = EARLYTX ENABLED)
(NO KEYWORD = LEDS ENABLED)
NOT USED
AUTO
16
(MS-DOS) displays command summary for
driver
(NDIS 3) sets the driver to autodetect the
cable type or set unshielded twisted pair.
DRIVERNAME=INTEL$ required as first
item in the INTEL section of the
PROTOCOL.INI file for the M16ANDIS
driver.
(NDIS 3) when set to OFF functions like
the keyword NOEARLYTX.
(10 Mbps only) enables the PRO/100 PC
Card to send and receive data simulta-
neously when connected to a full-duplex
hub. Default is keyword not used, and
therefore full-duplex "disabled." This
parameter is ignored in 100Mbps mode.
see INTERRUPT
VALID VALUES
(3 - 15)
(240 - 380)
(1 - 3)
(10 OR 100)
(C0000 - E8000)
(1 - 3)
(MEM OR IO)
(SUPPRESSES DISPLAY
(1 - 4)
(8 OR 16)