Microsoft Ms-Dos; Ibm Os/2 And Os/2 Warp; Microsoft Windows 3.X (Including Windows For Workgroups); Running The Intel Installation Program (Windows 3.X Including Windows For Workgroups) - Intel EtherExpress PRO/100 User Manual

5 Complete the installation process as prompted by the Windows
NT software.

Microsoft MS-DOS

For MS-DOS systems, see "Manual Installation" in the alphabetical
listing under the heading "Completing the Installation" later in this
chapter.

IBM OS/2 and OS/2 Warp

To install drivers on systems running IBM OS/2 and OS/2 Warp,
follow the instructions under Microsoft LAN Manager, Novell
NetWare Requester, or Ungermann-Bass Net/One in the alphabetical
listing under the heading "Completing the Installation" later in this
chapter.
Microsoft Windows 3.x (including Windows for
Workgroups)
Run the Intel Installation Program (as described under the next
heading) if you are using Microsoft Windows 3.1 or Windows for
Workgroups 3.11
Running the Intel Installation Program
(Windows 3.x including Windows for
Workgroups)
To install under Windows or Windows for Workgroups using the
Intel Installation Program, insert Disk 1, Installation Disk, into your
disk drive, and proceed as follows (substitute the correct drive letter for
your system):
1 From the Program Manager, choose File, then Run. In the
Command Line box, type the following:
A:SETUP
2 Press Enter or click OK.
Software Installation
17