Diagnostic Test Utility Settings (M16Atest.exe) - Intel EtherExpress PRO/100 User Manual

Keywords are not case sensitive, and can be abbreviated to a unique
sequence of initial characters (for example, IN for INTERRUPT).
Packet Driver Keywords
KEYWORD
FULLDUPLEX
INTERRUPT=
IOADDRESS=
IOWAITSTATES=
LINESPEED=
LINKDISABLE
MEMORY=
MEMWAITSTATES=
MODE=
NOCHECK
NOEARLYRX
NOEARLYTX
NOLED
SINT
SOCKET=
WORDSIZE=
Packet Driver Example
A typical sequence for loading the packet driver M16APD.COM with
M16ACFG.EXE and default configuration settings is as follows:
M16ACFG
M16APD
ETHDRV
If nondefault configuration settings are used, these must be stated on
the M16APD.COM command line. For example,
M16ACFG
M16APD IOADDRESS=320 INT=7
ETHDRV

Diagnostic Test Utility Settings (M16ATEST.EXE)

The M16ATEST.EXE utility is a Intel utility for testing Intel adapter
hardware. It is an MS-DOS executable file.
M16ATEST.EXE tests the adapter hardware functionality, including
the PC Card interface, the serial EEPROM, the local SRAM, the
Ethernet controller, and the PHY interface (adapter modules). It
displays manufacturing information including serial number and date
and time of manufacture. It also displays configuration information
including interrupt, I/O address, and starting memory location used.
DEFAULT
(NO KEYWORD = FULL-DUPLEX DISABLED)
5
320
0
AUTO
(NO KEYWORD = LINK INTEGRITY EN
ABLED)
D2000
0
MEM
(NO KEYWORD = ADAPTER RESOURCE
VERIFICATION ENABLED)
(NO KEYWORD = EARLYRX ENABLED)
(NO KEYWORD = EARLYTX ENABLED)
(NO KEYWORD = LEDS ENABLED)
60
AUTO
16
Configuration Reference
VALID VALUES
(3 - 15)
(240 - 380)
(1 - 3)
(10 OR 100)
(C0000 - E8000)
(1 - 3)
(MEM OR IO)
(60 - 80)
(1 - 4)
(8 OR 16)
79