Novell Netware - Intel EtherExpress PRO/100 User Manual

C H A P T E R 2

Novell NetWare

ODI Driver
The Intel ODI driver allows for the concurrent use of Novell NetWare
and other protocols that support Novell's Open Data-Link Interface
(ODI) specification.
NetWare
1 Run the Intel Installation Program from Disk 1, Installation Disk.
2 Choose Novell NetWare from the Select Network Operating
System screen.
3 Follow the prompts to complete the installation.
4 The Intel Installation Program will reboot the computer and verify
the NetWare connection.
5 Reboot your computer again.
6 Log in to the network.
Note
The Intel Installation Program uses the NetWare VLM shell to
connect to your NetWare server. The Installation Program
decompresses and copies all the required files.
If you are installing manually, without the Intel Installation
Program (under MS-DOS or Windows 3.x) you must first
decompress the VLM files by running the MS-DOS batch file
DCOMPVLM.BAT from the Network Drivers Disk, as follows:
DCOMPVLM [ path ]
where [ path ] is the directory for NetWare files (usually
C:\NWCLIENT). DCOMPVLM will decompress and copy all
required files to the designated directory.
If you need NETX shell support, contact your System Adminis-
trator.
If using DOS 5.0, check your CONFIG.SYS file for the statement
LASTDRIVE=Z. If not present, add it.
46