Intel EtherExpress PRO/100 User Manual page 34

C H A P T E R 2
7 If prompted to do so, insert the Intel Network Drivers Disk (Disk
2) when prompted and type the path
A:\NDIS
8 Press Esc twice to bypass error messages.
9 Continue with the installation until finished.
10 Use a text editor to add the following two lines in your
CONFIG.SYS file at the location indicated by the "rem"
statement concerning insertion of the driver name:
device=\LSP\M16ACFG.EXE
device=\LSP\M16ANDIS.EXE
11 Copy the file M16ACFG.EXE and M16ANDIS.EXE from the
directory C:\INTEL\M16A to the C:\LSP directory on your hard
disk.
12 Use a text editor to edit the PROTOCOL.INI keyword settings in
the C:\LSP directory to match the keywords contained in the
sample PROTOCOL.INI file located at C:\INTEL\M16A as
required (unless you are using Intel PRO/100 PC Card default
settings).
13 Save the files and reboot the PC.
IBM Local Area Network Support Program (version 1.2)
NDIS 2.0 Driver
1 Run the Intel Installation Program from Disk 1, Installation Disk.
2 Choose IBM LAN Support Program from the Select Network
Operating System screen.
3 Follow the prompts to complete the Intel segment of the
installation.
4 Install the IBM Local Area Network Support Program according
to the instructions in the IBM Local Area Network Support
Program User's Guide. The following instructions refer to the
prompts and messages displayed with the Configuration Aid
automated install software provided with the LAN Support
Program.
5 If a message appears during the LAN Support Program
installation indicating there are no IBM LAN adapters installed in
the workstation, bypass the message by pressing Enter.
6 Answer [N]o to program support for the PC Network Adapter.
34