Intel EtherExpress PRO/100 User Manual page 88

C H A P T E R 4
izes the PRO/100 PC Card memory and Ethernet controller. The
Memory test tests the SRAM on the PRO/100 PC Card.
A failure in any of these tests may indicate that service is required for
the PRO/100 PC Card. Contact Intel Customer Support.
Adapter Data Window
This section displays the model and serial numbers of the unit, its
manufacturing date and time, and its network node address. This
data has been preprogrammed at the factory and cannot be altered.
Important
Write down the PRO/100 PC Card model, serial
number, and network (node) address for reference.
Customer Support will ask you to supply the model and serial numbers
when requesting technical assistance or warranty service from Intel.
Configuration Window
This portion of the diagnostic screen lists current interrupt setting, port
or I/O address, and the starting memory location for the Intel PRO/100
PC Card.
Advanced Configuration Window
Line Speed - Indicates line speed: 10, 20 (full duplex), or 100Mbps.
Mode - Shows the memory mode of the adapter: either Memory
Mapped I/O mode or I/O-only mode.
Word Size - Indicates word size that the adapter is using: 16 (default)
or 8.
Early Receive - Indicates whether the adapter is operating in early
receive mode.
Early Transmit - Indicates whether the adapter is operating in early
transmit mode.
88