Intel EtherExpress PRO/100 User Manual page 77

M16ANDIS.OS2
Most installations will be able to use the settings implemented in the
PROTOCOL.INI file by the Intel Installation Program. If any param-
eters need to be changed, use an ASCII text editor to modify the
PROTOCOL.INI file with the appropriate keywords and values.
Keyword syntax for PROTOCOL.INI can be found below. Keywords
are not case sensitive, and can be abbreviated to a unique sequence of
initial characters (for example, IN for INTERRUPT, IO for
IOADDRESS). A Keyword Alphabetical Reference follows the
keyword listings.
PROTOCOL.INI Example
[INTELNET]
DRIVERNAME=INTEL$
MEM=0XD2000
MODE=IO
NDIS 2.0.1 Keywords (M16ANDIS.EXE and M16ANDIS.OS2)
Keyword
DRIVERNAME=INTEL$ (REQUIRED FIRST ITEM IN PROTOCOL.INI)
FULLDUPLEX
INTERRUPT=
IOADDRESS=
IOWAITSTATES=
LINESPEED=
LINKDISABLE
MEMORY=
MEMWAITSTATES=
MODE=
NOCHECK
NOEARLYRX
NOEARLYTX
NOLED
SOCKET=
WORDSIZE=
NDIS Driver Example - MS-DOS
The following example illustrates the use of M16ACFG.EXE with the
M16ANDIS.EXE driver in a CONFIG.SYS file supporting Microsoft
LAN Manager:
DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /
I:C:\LANMAN.DOS
DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\INTEL\M16ACFG.EXE
DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\INTEL\M16ANDIS.EXE
DEVICE=C:\LANMAN.DOS\DRIVERS\PROTOCOL\TCPIP\TCPDRV.DOS
I:C:\LANMAN.DOS
Intel OS/2 NDIS 2.0.1 driver
Default
(NO KEYWORD = FULL-DUPLEX DISABLED)
5
320
0
AUTO
(NO KEYWORD = LINK INTEGRITY EN-
ABLED)
D2000
0
MEM
(NO KEYWORD = ADAPTER RESOURCE VERI
FICATION ENABLED)
(NO KEYWORD = EARLY RECEIVE EN
ABLED)
(NO KEYWORD = EARLY TRANSMIT EN
ABLED)
(NO KEYWORD = LEDS ENABLED)
AUTO
16
Configuration Reference
Valid Values
(3 - 15)
(240 - 380)
(1 - 3)
(10 OR 100)
(C0000 TO EE000)
(1 - 3)
(MEM OR IO)
(1 - 4)
(8 OR 16)
77