Intel EtherExpress PRO/100 User Manual page 93

35MB of space. This will allow you to change settings on the system
without using your CD-ROM. This also allows you to install Windows
95 without depending on the real mode SCSI CDROM driver.
Installing Windows 95 PC Card support: How do I install PC Card
support for the PRO/100 PC Card?
To install PC Card Socket support, it is always advisable to let
Windows 95 do an autodetect to determine the type of PC Card
controller you have. Also make sure you have not loaded any real
mode Card and Socket Services drivers before proceeding.
1 Click the Start button in the lower left corner of the screen.
2 Choose the menu item: Settings.
3 Choose the menu item: Control Panel.
4 Double click on the "PC Card (PCMCIA)" icon.
5 One of two dialog boxes should appear:
a If a dialog box entitled "PC Card (PCMCIA) Properties"
appears, this means you have already installed the 32-bit PC
Card support and you are finished.
b If a dialog box entitled "Welcome to the PC Card (PCMCIA)
Wizard" appears, proceed to step 6.
c If neither of these dialog boxes appears, add PC Card support
by doing the following: double click on My Computer,
double click on Control Panel, double click on Add New
Hardware, and click Yes for Autodetect. After Windows 95
detects and installs PC Card support, restart Windows 95, and
go back to step 1.
6 The dialog box "Welcome to the PC Card (PCMCIA) Wizard"
will ask the following question: "Are you using a PC card
(networking card, CD-ROM connected to a SCSI card, etc.) to
install windows?" The default answer is No. If you did use a PC
Card SCSI adapter or a network card to install Windows 95, it is
recommended that you keep a copy of the Windows 95 directory
on your hard disk and not load any real mode PC Card or
network drivers. Press Enter to select No.
7 The dialog box "PC Card (PCMCIA) Wizard" should now
appear. It should read as follows: "Windows did not find any
Troubleshooting
93