Network Operating System Troubleshooting Under Windows 3; Artisoft Lantastic - Intel EtherExpress PRO/100 User Manual

Micro International 486/66
Ninja 486 Notebook
Noteable 486/50
Sager 486
Sceptere 486/33
Sharp
Twinhead
Ultra 486/66
Windows won't load after installing adapter.
Try WIN /D:X. If windows loads this way, add the EMMExclude
parameter in your SYSTEM.INI file to exclude the memory range
used by the Intel adapter.
For example:
EMMExclude=D000-D3FF
PRO/100 PC Card Adapter is not found when driver is executed.
If your computer is equipped with a sound device, try using INT 10 in
PROTOCOL.INI or NET.CFG. If this does not work, determine the
interrupts used by your sound device and any other device in your
computer. Then specify a unique interrupt for the Intel adapter.
If your computer uses CardTalk Card and Socket Services, they must
be release 3 or greater. If not, they must not be loaded in the
CONFIG.SYS.
Network Operating System Troubleshooting under
Windows 3.x

Artisoft LANtastic

Driver loads but I cannot attach to any other workstations on the
network.
• Download the latest drivers from the Intel BBS or http://
support.intel.com.
• Run the test utility to see if there is network traffic.
• Remove Card and Socket Services.
Troubleshooting
105