Chapter 7: Novell Netware 3.1X, 4.0X; Installation - Intel 486MIS Quick Start Manual

CHAPTER 7: NOVELL NETWARE 3.1X, 4.0X

INSTALLATION

We recommend that you make backup copies of all Novell and Driver
supplied diskettes using DOS "DISKCOPY" and use those backup copies
as your working diskettes.
Use the NetWare 386 file SERVER.EXE to start the installation process.
You will be prompted for a file server name and an IPX internal network
number. Consult the NetWare 386 User's manual for this information.
The NetWare 386 prompt (":") will now be displayed. Insert the 486MIS
Driver Diskette into drive A:. Use the LOAD command to install the
driver.
·
The correct syntax to load the NetWare v3.11 driver is:
:load a:\net386.311\aha1510
·
The correct syntax to load the NetWare v3.12 driver is:
:load a:\net386.312\aha1510
·
The correct syntax to load the NetWare v4.01 driver is:
:load a:\net386.401\aha1510
The module "ASPITRAN.DSK" also needs to reside in the same
directory.
There are several command line [options] that can be specified when the
driver is loaded. These are described below.
Option
port =
verbose =
486MIS System Board User's Manual
Possibl
e
Values
340 This option selects the 486MIS SCSI port
140 location. Default value is 340.
y With this option, the driver will display
[options]
[options]
[options]
Description
Page 51