Setup And Installation For Microsoft Windows 2000 And Windows Nt 4.0 - Intel U3-1L Quick Start Manual

Server raid controller u3-1l low profile
Table of Contents

Advertisement

Setup and Installation for Microsoft Windows
Windows NT
4.0
NOTE
This guide details the steps necessary to setup the SRCU31L for local
RAID administration. If you wish to setup remote administration for the
SRCU31L, refer to Chapter 2, "Advanced Installation Steps" in the
SRCU31L User's Manual.
*Remote administration is not supported on Windows 2000 Professional or
Windows NT 4.0 Workstation.
Software Requirements
Software Requirements for Microsoft Windows 2000
SRCU31L CD-ROM
Hard Disk Space (for RAID Software Suite): 9 MB Minimum
Microsoft Windows 2000 Server*, Advanced Server*, or Professional*
SRCU31L Windows 2000 Installation Driver Diskette (Microsoft
Windows 2000 SCSI Miniport Diskette) (one blank high density floppy
diskette required)
Microsoft Internet Explorer 5.0 or greater* (included with Windows 2000)
*
Not supplied
Software Requirements for Microsoft Windows NT 4.0
SRCU31L CD-ROM
Hard Disk Space (for RAID Software Suite): 9 MB Minimum
SRCU31L Windows NT Installation Diskette (Microsoft Windows NT
SCSI Miniport Diskette) (one blank high density floppy diskette required)
Microsoft Windows NT 4.0 Server* or Workstation*
Microsoft Windows NT 4.0 Service Pack 4 or greater*
Microsoft Internet Explorer 4.00 or greater*
*
Not supplied
Intel Server RAID Controller U3-1L (SRCU31L)
Quick Start Guide
2000 and
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srcu31l

Table of Contents