Omron SYSMAC C200H-IDS01-V1 Operation Manual page 93

Specifications
Characteristics
Note 1. The Read/Write Head (or Antenna) is supplied 26 VDC. Refer to the C200H PC Installation Guides
(W111 and W218) for information on system design.
78
Item
Communication Interactive
Control
Procedure
Number of R/W One per ID Sensor Unit.
Heads (Anten-
nas) connected
Data Carrier C200H-IDS01-V1:
(DC) C200H-IDS21:
Commands The following seven commands are used:
Read, Write, Auto Read, Auto Write, Clear-all, Auto Read/Write
Abort, and Data Management (C200H-IDS01-V1 only)
Data transferra- Up to 512 words (1024 bytes) can be transferred at 20 words/scan.
ble per instruc-
tion
Diagnostic • CPU watchdog timer
functions
• Communication errors
Six communication errors identify the causes of errors that have
occurred during communication between the Data Carrier and
the ID Sensor Unit. (i.e. Data Carrier missing, communication
error)
• Error Log
The Error Log function allows communication errors to be dis-
played in statistical form or in order of occurrence. Error infor-
mation is retained by the back-up capacitor.
Monitoring The following monitoring functions are available when the ID Sen-
functions sor Unit is connected to a Hand-held Programming Console. (Use
the keyboard sheet provided with the ID Sensor Unit.) (Cable
length: 4 m max.)
Read (1 byte) Stepwise Write (1 byte)
Continuous Write
Test
Error Log
Memory backup Error information is backed up by a capacitor for 15 days (at 25°C).
See note 2.
Number of 5 words between words 100 through 199 (reserved for Special I/O
words required Units) in the IR area
Internal current 250 mA max. at 5 VDC. 120 mA max. at 26 VDC (to drive Read/
consumptions Write Head or R/W Antenna; See note 1.)
Dimensions 35(W)x130(H)x100.5(D) mm
Weight 400 grams max.
Specifications
V600series Data Carrier
V620series Data Carrier
Appendix A