The Job Function - Omron SYSMAC C200H-IDS01-V1 Operation Manual

Monitoring
3-2-3

The JOB Function

Address Page Numbers
56
Note 1. The number "1" need not be changed or reset, unless otherwise instructed
or necessary.
2. The C200H-IDS01-V1 indicates "HEAD 1" while the C200H-IDS21 indi-
cates "ANT.1". Throughout this section, "HEAD 1" is displayed on the
screen, but "ANT.1" will be displayed when the C200H-IDS21 is used.
3. The address page number must be set in hexadecimal on the C200H-
IDS01-V1 and decimal on the C200H-IDS21.
Use the JOB operation when the current address page number must be
changed.
The JOB operation can also be used to set a Read/Write Head (or Antenna)
wordnumber and address page number. However, since the Read/Write Head
(or Antenna) word number is already fixed to 1, no word number has to be set.
There are 2K bytes of addresses in the Data Carrier.
000
through
0FF
Address
800
range
through
8FF
1000
through
10FF
Address Page Number
0 1 2
100 200
through through
1FF 2FF
8 9 A
900 A00
through through
9FF AFF
10 11 12
1100 1200
through through
11FF 12FF
3 4 5
300 400 500
through through through
3FF 4FF 5FF
B C D
B00 C00 D00
through through through
BFF CFF DFF
13 14 15
1300 1400 1500
through through through
13FF 14FF 15FF
Section 3-2
6 7
600 700
through through
6FF 7FF
E F
E00 F00
through through
EFF FFF
16 17
1600 1700
through through
16FF 17FF