Revision History - Omron SYSMAC C200H-IDS01-V1 Operation Manual

A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
The following table outlines the changes made to the manual during each revision. Page numbers refer to the
previous version.
Revision code
1 February 1990
2
3
04

Revision History

Cat. No. W153-E1-04
Date
Original production
June 1993 W153-E1-1 was rewritten and reorganized using the text and format of
W179-E1-1.
July 2000 Front and Inside Front Cover: "GUIDE" changed to "MANUAL."
Page v: Precautionary information added.
Page 2: Minor additions made to graphic.
Pages 4, 15, 51: Information on MD–S command added.
Page 4: Information on maximum distances added.
Pages 14, 17: "Command execution bit" changed to "command execution flag."
Page 17: "No. of command data bits" changed to "No. of command data words."
Page 20: Changes made to information on MD commands.
Page 29: Information on management of overwriting operations added.
Page 37: Change made to bottom paragraph.
Page 38: Warnings added.
Page 40: "10904" corrected to "10900" in graphic.
Pages 40 to 46: Minor changes made to graphics.
Pages 41, 42, 43, 44, 45, 46, 48, 50, 52: Changes made to operation explana-
tions.
Page 89: Appendix D added.
May 2003 Page xii: Added safety precautions.
Page 83: Corrected command data storage address for DM Area for Special I/O
Units. "n+5 to n+9" corrected to "n+4" in CIO Area data configuration diagram.
Revision code
Revised content
95