Omron SYSMAC C200H-IDS01-V1 Operation Manual page 82

Monitoring
Clearing Statistical Error Information (Key 4)
ERR
4
SET
To change date
DATA
9
For no
change
0
of date
0
SET
ERROR1 2 3 4
L S CL CS
CLEAR STA.ERRORS
CLEAR S?PUSH SET
"S" = "Statistical"
CHANGE the DATE?
90-07-25
Year Month Day
CHANGE the DATE?
_ − −
CHANGE the DATE?
0
90-_-
CHANGE the DATE?
9
90-09-_
CHANGE the DATE?
5
90-09-05
HEAD 1 PAGE 1
STadrs1F data 29
Press key 4 to clear the statistical error informa-
tion and set a new registration date.
The message "CLEAR S?" is displayed, asking
for confirmation that the statistical error
information is to be cleared.
Press the RESET key to retain the information.
Press the SET key to clear the information and
set a new date from which statistical error
information is to be collected. When the error
information has been cleared, the previous
registration date is displayed, followed by the
message, "CHANGE the DATE?"
Press the DATA key to begin entering the date.
Enter the last 2 digits of the year. In this exam-
ple, the year is set to 1990.
Next, enter the month as a 2-digit number (01
for January; 09 for September). In this exam-
ple, the month is set to September.
Now input the day as a 2-digit number. Be sure
to input the prefix 0 when entering a single-digit
day (i.e. 01, 02). In this example, the day is set
to the 5th.
Press the SET key to set the date. The display
will return to the reset status.
If the month is set to 00 or greater than 12, or
if the day is set to 00 or greater than 31, all the
previously set values will be cleared and the
date must be re-entered.
Section 3-2
67