Monitoring
Setting Address Page
Numbers
JOB
SET
INC
INC
DEC
SET
There are two methods for setting address page numbers: with the INC and
DEC keys or with the DATA key (refer to the following figures). In the following
example, the INC and DEC keys are used.
HEAD 1 PAGE 00
STadrs00 data 00
HEAD 1 PAGE 00
STadrs00 data 00
HEAD 1 PAGE 01
STadrs00 data 00
HEAD 1 PAGE 02
STadrs00 data 00
HEAD 1 PAGE 01
STadrs00 data 00
HEAD 1 PAGE 03
STadrs00 data 00
Press the JOB key while the initial
message or reset message is dis-
played.
A R/W Head (or Antenna) number can
now be set; as the word number is
already fixed, press the SET key to
continue.
The address page number is
increased by one each time the INC
key is pressed.
The address page number is
decreased by one each time the DEC
key is pressed.
After the address page number has
been selected, press the SET key.
Section 3-2
57