Omron SYSMAC C200H-IDS01-V1 Operation Manual page 73

Monitoring
C200H-IDS01-V1
HEAD 1 PAGE 0
JOB
STadrs00 data 00
HEAD 1 PAGE 0
SET
STadrs00 data 00
HEAD 1 PAGE
DATA
STadrs00 data 00
HEAD 1 PAGE 0
0
STadrs00 data 00
HEAD 1 PAGE 0A
A
STadrs00 data 00
C200H-IDS21
ANT.1 PAGE 0
JOB
STadrs00 data 00
ANT. 1 PAGE 0
SET
STadrs00 data 00
ANT. 1 PAGE
DATA
STadrs00 data 00
ANT. 1 PAGE 5
5
STadrs00 data 00
ANT. 1 PAGE 5
SET
STadrs00 data 00
58
There are two methods for setting address page numbers: with the INC and
DEC keys or with the DATA key. In the following example, the DATA key is
used.
Press the JOB key while the initial message or
reset message is displayed.
A R/W Head word number can now be set; as
the word number is already fixed, press the
SET key to continue.
Press the DATA key; an address page number
can now be input.
Set the address page number to the desired
value (within the range 0 through F) by pressing
the corresponding numeric key. In this example,
the address page number is set to 5.
Set the lower digit of the address page number to
the desired value (within the range 0 through F) by
pressing the corresponding numeric key. In this
example, the address page number is set to 0A.
Press the JOB key while the initial message or reset
message is displayed.
A R/W Antenna number can now be set; as the word
number is already fixed, press the SET key to continue.
The address page number is decreased by one each
time the DEC key is pressed.
Set the address page number to the desired value
(within the range 0 through 9).
In this example, the address page number is set to 5.
Press the SET key to complete the procedure.
Section 3-2