Program *11-2 - Cama Trunk Group Hunting Assignments - Toshiba DK14 Programming Manual

Program *11-2 – CAMA Trunk Group Hunting
Assignments
Processor Type:
Program Type:
Initialized Default:
✱ ✱ ✱ ✱
Hunt from CAMA Trunk Group (01~08)
Program *11-2 Overview
This program enables E911 calls to hunt for an idle line in a CAMA trunk group in the order
assigned in this program.
If all lines in a CAMA trunk group are in use, a new 911 call that attempts to connect to a busy
trunk group can hunt to another trunk group. If that group is busy, the call will hunt to another
CAMA trunk group until an idle group is found. E911 calls will hunt for an idle line in a CAMA
trunk group in the order assigned in this program. Within each CAMA trunk group, E911 calls will
hunt the lines in that group from the lowest numbered line to the highest numbered line. This
hunting operation is true if the lines in a CAMA trunk Group are CAMA trunks or normal CO
lines.
Strata DK Programming 5/00
DK40i, all RCTUs and BCUs (Release 4.3)
System
Blank
✱
Hunt from CAMA
Trunk Group
01
02
03
04
05
06
07
08
Program *11-2 – CAMA Trunk Group Hunting Assignments
DATA = Hunt to CAMA Trunk Group (01~08)
Hunt to CAMA Trunk
Group
E911
8-7