Program 55 - Lcr Modified Digits Table - Toshiba DK14 Programming Manual

Program 55 – LCR Modified Digits Table
Processor Type:
Program Type:
Initialized Default:
Program 55 Series Overview
This program defines call handling so the route definition used by LCR is invisible to the station
user. The station user handles all calls the same way. The goal is for LCR to remember the dialing
peculiarities of each call route, so the user does not need to know.
Processor
DK14
DK40i
RCTUA
Each modified digits table assigns editing steps that include:
Deleting a pre-defined quantity of digits from the front of the number dialed
o
(Program 55-0).
o Adding a pre-defined number to the front of the number dialed (Program 55-1).
o Adding a pre-defined number to the end of the number dialed (Program 55-2).
Strata DK Programming 5/00
DK14, DK40i, all RCTUs and BCUs
Least Cost Routing
See each program in the Program 55-X series
Modified/Add/Delete
Digit Tables
6
6
6
Program 50-2 – LCR Home Area Code
Processor
RCTUBA/BB, B1CU
RCTUC/D, B2CAU/BU, B3CAU/BU
RCTUE/F, B5CAU/BU
Least Cost Routing
Modified/Add/Delete
Digit Tables
6
12
12
5-19