Program *67-2 - Call Types For Isdn Trunk Group Supported - Toshiba DK14 Programming Manual

Program *67-2 – Call Types for ISDN Trunk Group
Supported
Processor Type:
Program Type:
Initialized Default:
✱ ✱ ✱ ✱
SEL = 2
Enter the Trunk Group (01~16)
Enter the Time Zone (1~3)
For Rel. 4.0, enter 1
Trunk
Time Zone
Groups
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Program *67-2 Overview
This program defines the call type or "Bearer Services" allowed for each ISDN trunk group. These
settings will be set for three different time zones in an upcoming release. All of the call types that
will be used should be turned on. Normally, Speech and 3.1 kHz Audio (non-ISDN voice calls and
fax calls), should be turned on.
Strata DK Programming 5/00
DK40i, all RCTUs (Release 4.0 or higher) and BCUs
Trunk, PRI
Release 4.0 and 4.1 blank; Release 4.15 and higher all LEDs On for Time Zone 1
✱
Speech 3.1 kHz Audio
LED 01
Program *67-2 – Call Types for ISDN Trunk Group Supported
Turn on LEDs 01~04 to select the
call type. See table below.
64 kbps. Data 56 kbps. Data
LED 02
LED 03
ISDN
LED 04
7-37