Program *31 - Group Pickup Assignments - Toshiba DK14 Programming Manual

Program *31 – Group Pickup Assignments
Processor Type:
Program Type:
Initialized Default:
✱ ✱ ✱ ✱
Station Logical Port Number
Enter the station logical port which will be assigned to a pickup
group or groups. To add a port range, enter XXX✱XXX (low port ✱
high port).
Processor Type
DK14
DK40i
RCTUA
RCTUBA/BB
RCTUC/D
RCTUE/F
Pickup Group LED
Pickup Group 20 20
Pickup Group 19 19
Pickup Group 18 18
Pickup Group 17 17
Pickup Group 16 16
Pickup Group 15 15
Pickup Group 14 14
Pickup Group 13 13
Pickup Group 12 12
Pickup Group 11 11
Pickup Group 10 10
Pickup Group 9 09
Pickup Group 8 08
Pickup Group 7 07
Pickup Group 6 06
Pickup Group 5 05
Pickup Group 4 04
Pickup Group 6 03
Pickup Group 2 02
Pickup Group 1 01
Program *31 Overview
Stations can be divided into as many as 20 pickup groups (see the legend above the record sheet).
Station users can pick up calls (internal or line) that are ringing any station within their group by
dialing a single access code (or with a
and pick up calls that are ringing stations in other groups by dialing selected access codes.
Stations can belong to more than one group. (See Program 05 for access codes.) This feature also
picks up ringing transfer and hold recall calls, but does not pick up held calls or selectively by
directory number.
To pickup held or ringing [PDN] and/or [PhDN] calls selectively, use the
access code (where XXX is the [PDN] or [PhDN]).
Strata DK Programming 5/00
DK14, DK40i, all RCTUs and BCUs
Station
All LEDs Off
✱
Port Range Pickup Groups
000~009 8
000~027 16
000~031 20
000~079 20
000~239 20
000~335 20
Program *31 – Group Pickup Assignments
Light LED Buttons for the port specified in the last
step. In the table below, mark an "X" for all LED
Buttons which should be lit.
Processor Type Port Range
B1CU 000~055
B2CAU/BU 000~111
B3CAU/BU 000~191
B5CAU/BU 000~335
Port
button assigned with Code 480 in Program 39),
System & Station
Pickup Groups
20
20
20
20
+ XXX pickup
3-89